46
1
T
EMPERATURE CONTROLLER
/
INTERNAL LIGHT
/
COVER OF THE
ILLUMINANT
(positioning depending on model)
2
G
LASS SHELVES
(total number: four)
3
C
RISPER
including break-proof glass cover
4
D
OOR TRAYS
(total number: four)
5
A
DJUSTABLE FEET
4.2 Before initial operation
WARNING!
While unpacking, the packaging materials (polythene
bags, polystyrene pieces, etc.) should be kept away from children and
pets. CHOKING HAZARD! RISK OF INJURY!
NOTICE!
Leave the appliance in an upright position for
4 - 6 hours
before you connect it to the mains to ensure, that the oil has flowed back
into the compressor.
NOTICE!
If you use the appliance for the first time or the appliance has
been disconnected from the mains for a longer period of time, allow the
appliance to cool down for 3 until 4 hours on medium temperature setting
(s. chapter 4.3
SETTING OF THE TEMPERATURE
)
before
you place any fresh
food in the appliance. If you place food in the appliance before it has
reached its normal operating temperature, this foods can spoil.
1.
Remove all packaging materials.
2.
Adjust the feet and clean the appliance (see chapter
CLEANING AND
MAINTENANCE
).
3.
Do not start the appliance immediately after installation. Wait
4 - 6 hours
to
ensure proper operation.
4.
The settings of the temperature of the fridge can be adjusted manually. To do
this, turn the temperature controller for the temperature setting to the desired
preference. (s. chapter 4.3 S
ETTING OF THE TEMPERATURE
).
5.
If operation was interrupted, wait
5 minutes
before restart.
6.
The appliance needs some time to balance temperatures when you have
changed the settings before or when you have stored additional food in the
appliance. The duration of this period of time depends on the range of the
change, the ambient temperature, the amount of food and the frequency of
door-openings. When you set the temperature of the fridge these aspects should
be taken into account.
