36
4.
Do not install the appliance in a place where it may come in contact with water
or rain; otherwise the insulation of the electrical system will be damaged.
5.
Connect the appliance to the mains properly.
2.2 Pre-installation requirements
The worktop must be made of heat-resisting material. Structural elements should
not interfere with the installation area.
The installation must meet the safety requirements as well as the legal rules and
regulations.
The wall sat the hob should be covered with heat-resistant material, e.g. ceramic
tiles.
2.3 Selection of the installation environment / Dimensions
DANGER!
The appliance must be installed
by a qualified professional only
. Do
not carry out the installation yourself. RISK OF ELECTRIC SHOCK!
Important safety instructions
When installing the appliance ensure optimal heat radiation to maintain the
operating safety.
The wall and the reach of the heat radiation above the worktop must be made of
heat-resistant materials.
To avoid any damage, the sandwich layer and adhesive must resist heat.
Provide an installation opening relevant to the dimensions on the following
drawings. For installation and use, a minimum of
50 mm
and 200 mm
space
shall be preserved around the installation opening. (s. fig. below;
-Dimensions
of the hob-
).
The thickness of the Worktop hast to be at least 28 mm. Choose heat-resistant
materials for the work top only to avoid any deformation caused by the heat-radiation
of the appliance.
Important safety instructions
A
Height = 52 mm
B
Width = 580 mm
C
Depth = 510 mm
The thickness of the Worktop hast to be at least 28 mm.
36
