![Pkm IN4-2FZS Скачать руководство пользователя страница 69](http://html1.mh-extra.com/html/pkm/in4-2fzs/in4-2fzs_instruction-manual_1561100069.webp)
~
69
~
➢
The worktop must be rectangular and plane and made of heat-resisting material.
Structural elements should not interfere with the installation area.
➢
The thickness of the worktop for the installation of the induction hob must be
at
least 30 mm
.
➢
The wall sat the induction hob should be covered with heat-resistant material, e.g.
ceramic tiles.
➢
During operation of the induction hob, adjacent furniture or housing and all
materials used for installation must be able to resist a temperature of min. 85 °C
above the ambient temperature of the room the appliance is installed in.
➢
The power cable must not come into contact with cabinet doors or drawers.
➢
The appliance must be supplied with an adequate flow of fresh air from outside
the cabinet to the base of the induction hob.
➢
If the induction hob is installed above an oven, the oven must be equipped with
a cooling system.
➢
Install a thermal protection below the bottom of the appliance when installing it
above a drawer or a cupboard.
➢
The circuit breaker must be easily accessible.
2.3 Selection of installation equipment / Dimensions
➢
Cut out the installation opening as described on the drawing below.
Check
the
cut-out size with a ruler
before
cutting out the worktop.
➢
For installation and use, a
minimum of 50 mm
space shall be preserved around
the installation opening.
➢
The thickness of the work top should be
at least 30 mm
. Choose heat-resistant
materials for the work top only to avoid any deformation caused by the heat-
radiation of the appliance.
D
IMENSIONS OF THE INDUCTION HOB
(
MODELS
IN4-S
AND
IN4-2FZS)
AND
THE INSTALLATION OPENING
All dimensions are given in
millimetres.
Содержание IN4-2FZS
Страница 22: ...22 220 V 16 A H BRAUN J BLAU K GR N GELB...
Страница 77: ...77 220 V 16 A H BROWN J BLUE K GREEN YELLOW...