~
152
~
E
RROR
P
OSSIBLE CAUSE
(
S
)
M
EASURES
W
ATER REMAINS ON THE BOTTOM OF THE APPLIANCE
.
1.
Normal.
1.
A small amount of clean water
around the outlet keeps the water
seal functioning.
S
POTS AND FILM ON GLASSES AND CUTLERY
.
1.
Extremely hard water.
1.
Check the water hardness.
2.
Very low temperature of the water
supply.
2.
Check the temperature of the water
supply.
3.
The appliance is overfilled.
3.
Do not overfill the appliance.
4.
The dishes are placed improperly.
4.
Always place the dishes properly.
5.
Old or wet detergent.
5.
Always use proper detergent.
6.
The rinse aid container is empty.
6.
Refill the rinse aid container.
7.
Improper detergent dosage.
7.
Dose the detergent properly.
H
OW TO REMOVE SPOTS FROM GLASSWARE
.
a)
Remove all metal-made objects.
b)
Do not use a detergent.
c)
Select the longest programme.
d)
Start the programme. After 18 - 22 minutes the main-wash cycle begins.
e)
Open the door pour 2 cups of white vinegar in the appliance (bottom).
f)
Close the door and let the complete programme run. If these measures fail,
repeat the procedure but use
¼
cup (60 ml) of citric acid crystals instead of the
vinegar.
If the appliance shows a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists, please
contact the aftersales service.
