Pkm GKS 110, Инструкция по эксплуатации

Страница: 66 / 75

66
Check regularly the water drain and the water drain hole. Otherwise water
will get into your appliance or out of the appliance.

If the appliance shows a malfunction not noted on the schedule above or if
you have checked all items on the above schedule but the problem still exists,
please contact a service department.
The operating procedures described below are normal and do not indicate a
malfunction .

The refrigerant generates a sound similar to flowing water.
 Sometimes you may hear a sound which is generated by the injection
process of the cooling circuit.

Some humidity may accumulate outside the appliance, especially in a
moist surrounding. Simply wipe this humidity away.

The sides of the appliance may get warm while the cooling circuit of the
appliance is running.

Noise: when you run the appliance for the first time or the cooling
temperature falls below a certain level it will operate with high power to
reach the preset temperature.
 Condensed water : may be generated inside or outside the appliance by
high humidity or very warm ambient temperatures. Just wipe it with a dry
and soft cloth.

Clicking – you will hear the compressor click if it is activated or
deactivated.

Hum – is caused by the compressor while running.
 Knocking/snapping – may be generated by sequential expansion and
shrinkage of the components of the cooling system. It is caused by
variation of temperature before and after the compressor is activated or
deactivated.

Please commission an authorized professional for repairs if your appliance
malfunctions.

The appliance must be accessible for the engineer to perform any necessary
DANGER!
If your appliance does not seem to run correctly, please contact the
shop you purchased the appliance at.
DO NOT ATTEMPT
TO REPAIR THE APPLIANCE YOURSELF.