29
1
Rotary knob oven - temperature
2
Rotary knob oven - function
3
Rotary knob hotplate - bottom left
4
Rotary knob hotplate - top left
5
Rotary knob hotplate - top right
6
Rotary knob hotplate - bottom right
When you switch on the oven the internal light goes on.
7. OPERATING OF THE APPLIANCE
Before the first use
1.
Remove the packaging. Clean the hob and the interior part of the oven.
2.
Before you operate the oven for the first time, you must "burn-in" the enamel.
Proceed as follows.
a.
Clean the interior of the oven and the baking trays with a damp cloth.
b.
Check that you have removed the complete packaging.
c.
Insert the baking trays into the oven.
d.
Set the temperature to 250
0
and select the function TOP/BOTTOM
HEAT.
e.
Operate all heating elements at least once.; run the "burn-in" procedure for
2 hours.
f.
WARNING!
The procedure will cause significant smoke emission and
unpleasant odours so the room must be well-ventilated. This is a normal
operational characteristic caused by the protective impregnation against
corrosion damage.
Operating of the hob
Put a cookware directly onto a hotplate. Turn the corresponding knob
clockwise or anticlockwise to switch on the hob.
Turn the knob to position O/OFF/AUS to stop cooking.
CAUTION!
Strictly observe the following safety instructions.
1.
The hob should be clean at every time. Soiled hotplates do not transfer the heat
correctly.
2.
Protect the hob against corrosion.
3.
Switch off soiled hotplates.
