55
rotary knobs are not set to position
0
while resetting the oven, the oven starts
to heat again
3.4.4 Automatic cooking / baking function
❖
This function allows you to select
the duration of the cooking / baking time
and
to select
the time of the day
by which the oven will be switched off automatically
at the same time.
❖
The maximum settable duration of the cooking / baking time is 10 hours.
❖
The maximum settable time of the day for the end of the cooking / baking time is
10 hours from the current time of the day.
Description of the respective numerations: s. chapter 3.2.4 D
ISPLAY
H
OW TO SET THE AUTOMATIC COOKING
/
BAKING FUNCTION
:
1.
Place the food to be cooked or baked in the oven and close the door properly.
2.
Select the desired oven function (s. chapter 3.5
FUNCTIONS OF THE OVEN
) and oven
temperature using the corresponding rotary knobs (
A
/
C
// s. chapter 3.2.3
C
ONTROL PANEL
).
3.
Press the programme button
(
6
)
thrice
.
4.
The decimal points of the clock (
3
) are flashing.
5.
The operational status indicator "
OVEN IN USE
" (
2
)
on the display
goes on.
6.
The indicator "
AUTOMATIC COOKING
" (
1
) goes on.
7.
Set the desired
duration of the cooking / baking time
using the buttons
+
(
5
)
and / or
-
(
7
).
8.
Press the programme button
(
6
)
immediately
afterwards.
9.
The current time of the day is flashing.
10.
Set the desired
time of the day
by which the cooking / baking process
should be
finished
using the buttons
+
(
5
) and / or
-
(
7
).
11.
If the desired time of the day is displayed, release the
+
/
-
buttons.
12.
The cooking process starts at the
calculated time of the day
.
13.
If the cooking / baking process has been finished, an acoustic signal sounds and the
oven will be
switched off automatically
.
14.
The indicator "
AUTOMATIC COOKING
" (
1
) and the indicator of the
TIMER
(
4
) are
flashing.
15.
You can switch off the acoustic signal by pressing any button on the display.
16.
To switch off the oven, the rotary knob for the selection of the oven functions
(A) and the rotary knob for the selection of the temperature (C) must be set
to position
0
.
Содержание EBO9.4
Страница 42: ...42...
