Pkm EBO8 DPY, Инструкция по эксплуатации, Страница: 95 / 116

~
95
~
➢
During the self-cleaning process, smoke and irritating odours may
occur. Bevor you start the self-cleaning programme, remove coarse
impurities inside the oven to avoid strong odours and smoke during the
self-cleaning process.
➢
Never use water or detergents to remove the remaining residues after
the self-cleaning programme has finished. Simply remove the residues
using a microfibre cloth.
NOTICE! If the appliance is disconnected from the mains during the self-
cleaning process, the door looking remains activated. You have to connect
the appliance to the mains again so the automatic door locking can be
deactivated. However, the automatic door locking will only be deactivated
if the temperature inside the appliance is less than 300
0
C.
NOTICE! When the seal of the oven door is damaged, it must be replaced
by the manufacturer or an authorized aftersales service or a qualified
professional only.
Original spare parts should be used only .
P
YROLYTIC SELF
-
CLEANING PROGRAMME
:
-C
LEANING OF THE OVEN WITH HEAT
-
The default temperature of the self-cleaning programme is factory-set and
cannot be changed .
The default duration of the self-cleaning programme is factory-set ( 1.5 hours )
but can be changed individually. The settable duration is at least from 1 hour to
max. 2 hours .
1.
The oven must be in
STANDBY MODE
. In
STANDBY MODE
, the display indicates
the time / system time and the indicator «
TIME
/
SYSTEM TIME
» is on.
2. Turn the rotary knob for the selection of the
OVEN FUNCTIONS
« » until the
icon of the pyrolytic self-cleaning programme « » (see also chapter 4.7) is
displayed.
3. The temperature indicator « » displays the set self-cleaning programme
« » and the time indicator « » displays the default duration of the
self-cleaning programme.
4. If desired, turn the rotary knob «
TEMPERATURE
/
TIME
» to change the
default duration of this programme. The settable duration is at least from 1 hour
to max. 2 hours .
5. The default temperature of the self-cleaning programme cannot be changed .
6. Press the button «
START
» within 10 seconds to start the self-cleaning
programme. The countdown starts and the oven is in working mode.