28
Replacing of the illuminant
Do not touch the illuminant with your hands. The sweat on your fingers will
reduce the operating time of your new illuminant. Use a thin cloth or a thin
glove.
1.
WARNING!
Disconnect the appliance from the energy supply.
2. Disconnect the light wiring point which is located inside the hood (behind the
grease filter).
3. Using a screwdriver, remove the illuminant holder and wiring from the hood.
4. Replace the old illuminant by a new one of the same kind and power.
Required minimum distance to surfaces such as pot lids, oven
cloths etc. to avoid any hot parts and risk of fire.
--- m = 0,45 m
Only use self shielded illuminants to avoid hot parts, risk of fire
and exposure to UV-radiation.
Carbon filters
Conventional carbon filters
cannot be cleaned. The capacity of these filters is
limited. You can use such filters for about 3-6 months. Replace a depleted filter.
Find further information on the filter packaging.
