30
8.
Fix the chimney-installation bracket below the ceiling on the wall using the screws
and dowels.
Screw chimney ↔
bracket
Screw chimney ↔
bracket
9.
Lay the exhaust hose to the wall
outlet. Fix the exhaust hose with the
cable tie (1) on the wall-outlet.
10.
Fix the top chimney on the installation bracket (look also on step 8).
11.
Insert the grease filters and connect the appliance to the mains
4
.
➢
Check the correct position of the hood from front and side perspective.
Otherwise the appliance will not work properly.
2.3 Carbon filter
U
NPLUG
THE
APPLIANCE
BEFORE
INSTALLING THE CARBON FILTER
.
F
OR RECIRCULATING MODE ONLY
.
1
OPEN
2
CLOSE
You can order the carbon filter at
www.pkm-online.de!
Type name of the carbon filter: s. chapter T
ECHNICAL DATA
4
If the socket is covered by the chimney, you must plug in the appliance at an earlier point in
time.
