4
QM00992 - 1
Connection to the ports
Connection to the ports
NOTICE
►Use the cables with straight plugs, not L-shaped ones, as the
input ports of the projector are recessed.
►Only the signal that is input from the
COMPUTER IN1
can be output from
the
COMPUTER IN2
/
MONITOR OUT
port. The way is available only when
the MONITOR OUT is selected for the COMPUTER IN2. (
&
INPUT menu -
COMPUTER IN in the Operating Guide)
A
COMPUTER IN1,
B
COMPUTER IN2/MONITOR OUT
D-sub 15pin mini shrink jack
(1) for PC signal
• Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive)
• H/V. sync. Signal: TTL level (positive/negative)
• Composite sync. Signal: TTL level
Pin
Signal
Pin
Signal
1
Video Red
10 Ground
2
Video Green
11 (No connection)
3
Video Blue
12
A
: SDA (DDC data)
B
: (No connection)
4
(No connection)
5
Ground
13 H. sync / Composite sync.
6
Ground Red
14 V. sync.
7
Ground Green
15
A
: SCL (DDC clock)
B
: (No connection)
8
Ground Blue
9
(No connection)
-
-
(2) for Component signal
• Y : Component video Y with composite sync, 1.0±0.1 Vp-p, 75 Ω terminator
• Cr/Pr : Component video Cr/Pr, 0.7±0.1 Vp-p, 75 Ω terminator
• Cb/Pb : Component video Cb/Pb, 0.7±0.1 Vp-p, 75 Ω terminator
System:480i@60,480p@60,576i@50,576p@50,720p@50/60,1080i@50/60,1080p@50/60
Pin
Signal
Pin
Signal
1
Cr/Pr
9
(No connection)
2
Y
10 Ground
3
Cb/Pb
11 (No connection)
4
(No connection)
12 (No connection)
5
Ground
13 (No connection)
6
Ground Cr/Pr
14 (No connection)
7
Ground Y
15 (No connection)
8
Ground Cb/Pb
-
-
A
B
