7
1.
Attach legs to body as shown and tap into place with a wooden block or rubber mallet; secure with
M5x8 Phillips screws. Tighten screws by hand and level oven as needed.
2.
Insert gas inlet assembly into body as shown. Secure control valve with 2 supplied screws to body
front then secure pipe support with the third M4x5 Phillips screw. Attach control knob by aligning the
keyway and pushing onto valve spindle. Connect starter wire from valve assembly to starter plug
by fi rmly pushing it into place. TEST and CONFIRM that starter is providing an interior spark.
*Flip over to test and conFIRM that starter is providing an inte-
rior spark to venturi tube.
Starter
Connection
Interior
Spark
