53IT-00000137
1. Hardware Connection
Physical Connection
1. Be sure that your PC or laptop has connected to your local Ethernet network(HUB or Switch).
2. Be sure that IP Camera has connected to your local networking via the LAN port (RJ45) on the extension cable.
(For PoE model, user can use PoE Switch as power supply)
3. Plug the jack of power adaptor into power jack on the extension cable.
4. Ensure the power adaptor specification matches the power system (110V or 220V) and plug the adaptor into the
outlet. (This step is optional if used PoE switch for PoE model)
5. Use CAM FINDER software in CD to allocate your camera in networking, and launch browser to start connecting
with PC.
PS760D provides extra connections with outside devices. User can apply the integrated functional cable for GPIO
and External IR Board.
Please refer to the following table of pins definition respectively:
PS760D Quick Installation Guide
Dual Lens Panoramic
Dome Network Camera
Bracket Installation
NO.
A-1
B-1
Quantity
3
4 / 4
Screws
A-2
B-2
3
1
Pins Definition
Wall Mount & Ceiling Mount
In-Ceiling Mount
V1.0
2
1
Align and insert the 4 screw
pins to the 4 anchor points of
the bracket correspondingly.
Rotate clockwise to fix the camera.
Figure I
Step 1
Figure II
Step 2
Figure I
Step 1
Figure II
Step 2
Figure III
Step 3
Install the Bracket(B-2) by
applying the Screw(B-1)*4pcs.
Take Screw(A-1)*3pcs. Insert each
screw through the pan and then
the Bracket(A-2).
Concurrently squeeze the
Bracket(A-2)*3pcs into the ceiling
mezzanine. Tighten the 3 screws
to securely fasten the camera.
Finally, install the camera cover.
<English>
Loose the 4 screws of cover and
remove the cover.
