Pixlip 400097, Руководство пользователя

Страница: 2 / 20

2
TIPS TIPS & SAFETY
support@pixlip.com
SUPPORT REQUEST ASSEMBLY ONLY
WITH CLEAN
HANDS
TWO PEOPLE ARE
REQUIRED FOR THE
ASSEMBLY.
Before the installation and use of the appli-
ance, carefully read the supplied instructi-
ons. The manufacturer is not responsible for
any injuries or damages that are the result
of incorrect installation or usage. Always
keep the instructions in a safe and accessible
location for future reference. Assembly and
installation should only be carried out by
trained specialist personnel.
Please only use the delivered devices. Faulty
wiring can cause damage. Do not install or
use a damaged appliance.
Please consider that unauthorized modifi -
cations on the device are forbidden due to
safety reasons! Disconnect your system from
the power supply before starting installation
or maintenance work. Please make sure that
it cannot be switched on again accidentally.
Do not expose the device to direct sunlight,
moisture, extreme heat, hot light or strong
magnetic fields. Keep proper ventilation
around the unit and do not stack any object
on it. Never operate the device without
casing hood, with closed vent slots, at high
temperatures, at high air moisture.
Connect the system only to an easily accessi-
ble socket located near the installation site.
Always use a correctly installed shockproof
socket. To avoid tripping hazards, do not use
extension cables and don’t use multi-plug
adapters.
Output current and output wattage must not
exceed the rated values on the specifications.
Do not stare directly into the LEDs. Do not
use devices which can strongly focus light for
viewing the light beam. Do not use aggressi-
ve chemicals or abrasives for cleaning.