6
PL-A780 Camera Specifications
Document No.: 04646-01
PixeLINK PL-A780
MACHINE VISION CAMERA
SYSTEM GUIDE
Copyright © 2004 PixeLINK
All Rights Reserved
3 PL-A780 Camera Specifications
3.1 Features
Sensor
•
2/3" CMOS 2208 x 3000 resolution (7.73
mm x 10.50 mm - 13.1 mm diagonal)
•
3.5 µm square pixels
•
Rolling Shutter with fast reset capability
Frame Rate – frames per second
Table 5 Frame Rate - frames per second
ROI Size
Max Frame Rate (fps)
2208
x
3000
5
1584
x
1200
16
1272
x
1008
25
648
x
480
88
Performance
•
Spectral Range 400 – 1000 nm
•
FPN – TBD
•
PRNU – TBD
•
Dynamic Range – 56 dB linear (TBD)
Triggering / Strobe / Flash
•
S/W or H/W (external) trigger (TTL to 12V)
•
Two user-programmable outputs that can be
used stand-alone or synchronized to trigger
Controls
•
Exposure (0.063 ms to 2 seconds)
•
White balance and color gains
•
Gamma
•
Frame Rate (max to 2 fps)
•
Trigger & Strobe Modes
•
Region of Interest & Pixel Addressing
•
Pixel format 8-bit or 10-bit
Other Features
•
Programmable LUT
•
On-camera configuration memory
•
FPN and PRNU correction (gain/offset
correction, flat field correction – per pixel)
Compatibility
•
IIDC 1.3
o
Format 0, Modes 1, 3, 5 and 6
o
Format 7
Computer Interface
•
Two FireWire (IEEE 1394) connectors allow
daisy chaining of the camera
Optical Interface
•
Standard C-mount 1" optics
•
IR cut-off protective filter
Mechanical Interface
•
M3 threaded holes – 4 in front plate around
C-mount and 4 in camera base
Trigger Interface
•
6 pin Hirose connector
Power Requirements
•
Power supplied over the FireWire bus
•
Max consumption – 5 W
Size and Weight
•
Standard Configuration (PL-A782)
H x W x L: 1.65" x 1.97" x 4.02"
(42mm x 50mm x 102mm)
Weight (without lens): 200g
Environmental
•
FCC Class B & CE
•
Shock – 50 G
•
Vibration – 10 G (20 to 200 Hz)
•
Temperature – 0° C to 45° C (non-
condensing)
Status LED
•
Flashing red and green
•
Signals indicate idle, operating, warning and
failed status