8
Installation and Wiring
Installation
CAUTION:
Before installation, please ensure the device is disconnected from
the power source.
Steps to install brackets:
1. Attach the installation bracket to the enclosure using the screws provided
in the package separately.
2. The bracket is attached to the enclosure as shown.
3. Repeat steps 1-2 for the other side of the device.
4. Attach the brackets to the surface you want to hold the device against
using the screws (provided by others).
Wiring
Warnings:
Before wiring, disconnect the power from all devices.
During wiring, connect and disconnect the cables gently.
Steps to complete wiring:
1. Connect the VGA (such as PC) and HDMI sources (such as Blu-ray
player, Apple TV, 4K media player, etc) to the VGA IN, AUDIO IN and
HDMI IN ports of the transmitter respectively.
2. Connect the HDBT OUT of the transmitter to the HDBT IN of an HDBT
receiver (e.g. PF-MS31T1-RX) via a qualified CAT5e/6/7 cable.
3. Connect an HDMI source (such as BYOD system) to the HDMI IN port of
