6
Panel Description
Front Panel
3
2
1
No.
Name
Description
1
Power LED
On:
The device is powered on.
Off:
The device is powered off.
2
Status LED
•
Solid on:
The device is connected to encoder and
the video is displayed.
•
Blinking:
The device is disconnected from encoder.
•
Off:
The device is powered off or in the boot
process.
3
ID Key
Press to display the encoder and decoder information
on the screen such as device IP address or ID.
Rear Panel
3
2
1
No.
Name
Description
1
DC 12V
Connect to the supplied 12V power adapter.
2
LAN (POE)
Connect this gigabit RJ-45 port to an Ethernet switch for
device control and management. PF-IPHM can be
powered by a PoE-enabled power source equipment
such as a switch via this port.
Note:
We would recommend that you power this device by
using a power adapter or a PoE-enabled switch instead
of both of them at the same time.
3
Audio Out
Connect to an audio system such as an amplifier and
speaker.
4
HDMI Out
Connect to an HDMI display.
5
Serial
•
RS232-D:
connect this port to a PC for debugging
