10 of 12 pages
example:"STATIC TUBE:01"represent the LED tube 1 and so on.
2. When the controller goes into the static color select mode,press “+”and “-” to select the 7 colors.Press FLASH
to turn on flash effect to in this situation, pressing “+” and “-” buttons to adjust the flash speed.
Sound Active Mode
Press SA button to cycle among sound active program select and sensitivity select mode.Each press of this button
will change to the next mode.
1.When the controller goes into the sound active program select mode,press “+”and “-”to select the 24 sound
active modes.
2.When the controller goes into the sensitivity level select mode,press “+”and “-”to adjust the sound sensitivity
level.
M/S mode
Press SL button to switch between slave mode and net control mode.Each press of this button will change to the
next mode.
Select light program mode
Press R/G/B to choose the three different colors,and then pressing “+” and “-” buttons or put in three number
000-255 to adjust the intensity of all the LED tube lights.Press FLASH to turn on flash effect to in this situation,
pressing “+” and “-” buttons to adjust the flash speed.
DMX MODE
There are 3 DMX modes:
a 5 Channel mode,7 Channel mode and 26 Channel mode.You must set the DMX
Channel mode before you address the fixture.To select your desired DMX Channel mode press the DMX mode
button, and then press the “+” or “-” buttons to scroll through the 3 DMX Channel modes.
Set ADDR
Press this button to set the DMX address or initialize the program, then the red, green and blue lights will flash 2~3
times. Please put in 3 number ,for example, 1 2 3. After the red light is on, please put in the first number. After the
first number is accessed the green light will be on, then put in the second number. When the blue light will be on,
please put in the third number. After all the three numbers are put in, the red, green and blue lights will flash 2~3
times, which indicate that the DMX address is right and it go in to the DMX MODE automatically. If the address is
wrong the red light will be on. New DMX address should be put in.
If the 951 are put in, red and green lights will be on.Put “0” to initialize the program. If the wrong address is put in,
the red light will be on, indicating new address should be put in. Then the system will run in the designed mode.
Black Out mode
Press “BLACK OUT” to set the LED lights power on or power off by pressing this button.
C,All the system controlled by ART-NET
Set the controller to NET control mode,and now all the system can be controlled by Art-net .
1. Installation pictures:
Installation method 1:
