15
14
The
differences
between
[ ]
mode
and
[ ]
mode
are
as
follow
: [ ]
function
is
the
release
button
is
pressed
fully
and
keep
on
,
shoot
every
second
and
stop
shooting
until
the
release
button is released. While
[ ]
function
is
the
camera
will
start
shooting
when
the
release
button
is
pressed
fully
until
press
it
again
,
the
shooting
will
stop
.
Make sure to set the camera function to be [ ].
When the camera function is set to be
[ ],
the camera only shoot once but not
[ ]
shooting
.
When the camera
function
is
set
to be [ ],the camera
will be continuous shooting.
When the camera
function
is
set
to be
[
],
the
camera
will be delay shooting once.
Delay shooting
Delay shooting
setting
1. In the power-on state, move the activities icon to delay
shooting icon[ ] by pressing
the
move button[ ]or
right move button[ ]. Press the set button entering the
left
delay setting for adjusts the shooting numbers. Then the
numbers of shooting icon [ ],number of shooting [ ]will
blink at the same time.
2. Press button[ ]settings shot number can be increased,
press button [ ], settings shot number can be reduced. It
can be set between 1 to 99 sheets .
3. Press button[ ]enter into the delay setting of delay
shooting. The delay shooting time icon[ ], delay shooting
time[ ]will blink at the same time.
4. Press the button[ ], set the delay time increased,
press button[ ], set the delay time reduced. It can be set
between 1 to 59 seconds.
5. After set up the new parameters, press the set button, save and exit settings.
When enter to the delay shooting set, timer remote control
will
save
the
previous
setting
.
By pressing the left button[ ]or right button[ ], convert shooting numbers and delay
time
settings
.
Gently press button[ ]once to set numerical increased, hold
it on, set the value rapidly
increased; Press the button[ ]once to set the
numerical
reduced, hold on to set
the
values rapidly reduced.
The delay shooting function of TC-252 can user-defined the delay time and shots
.
Shooting control
Shooting control
