Pixel RF PRO-1B, Руководство по установке

Страница: 20 / 21

20
Magnetic Loop for Improved Reception and Noise Rejection
Model: RF PRO-1B (Receive-Only Antenna)
Shielded Active Broadband Magnetic Loop Antenna
38 inches
• Unique Loop architecture provides enhanced performance
•
Very low IMD, 27 dB Low-Noise Clifton Laboratories Norton Preamp insures good performance in both strong
and weak signal environments
•
Up to 30 dB rejection of locally radiated noise compared to whip antennas
•
Figure eight directivity and deep nulls to further reduce interference.
• Useable coverage range: 50 kHz to 30 MHz
•
Rejects power line noise
•
Rugged construction, easily mounts to a pole or flat vertical surface, 38 inch dia. aluminum loop, supplied
with LNA, power inserter and DC power supply
•
No manual tuning necessary
•
No Home Owners Association problems; low profile, easy to camouflage and works at ground level
•
Modular design for easy installation and maintenance
• Internal Transmit / Receive Switch disconnects Antenna / Preamp from receiver when transmitting
•
Available preamp with internal remote controlled AM Broadcast band elimination filter (High Pass Filter)
•
Made in the USA
NOT YOUR FATHER’S LOOP ANTENNA
Based on the work of Dr Carl Baum for the US Air Force his “ Moebius Strip Shielded Magnetic Loop Antenna ”
architecture outperforms much larger antennas ( see user reviews on page 1)
Dr Baum was a Senior Scientist at the US Air Force Research Laboratory and is the recipient of several awards from the
IEEE (Institute of Electrical and Electronic Engineers) for his work. Originally developed for a classified US Air Force project
involving the measurement of EMP (Electro Magnetic Pulse) from nuclear weapons, this design has wide application to
antennas for low- noise, interference-free radio reception over a wide frequency range. Pixel has coupled this antenna
with a custom made low-noise amplifier developed for Pixel by Clifton Laboratories with very high intermodulation
distortion (IMD) specifications (OIP3 = +48 dBm, OIP2 > +100 dBm) that can operate without saturating in high AM and
FM broadcast band signal environments.
Figure 1. Loop Antenna Pattern (looking down)
edge – on from above antenna
www.PixelSatRadio.com Phone: (303) 526 -1965
Page 20
• Made in the USA
NOT YOUR FATHER’S LOOP ANTENNA
Based on the work of Dr Carl Baum for the US Air Force his “Moebius Strip Shielded Magnetic Loop Antenna”
architecture outperforms much larger antennas.
Dr Baum was a Senior Scientist at the US Air Force Research Laboratory and is the recipient of several awards from
the IEEE (Institute of Electrical and Electronic Engineers) for his work. Originally developed for a classified US Air
Force project involving the measurement of EMP (Electro Magnetic Pulse) from nuclear weapons, this design has
wide application to antennas for low- noise, interference-free radio reception over a wide frequency range. Pixel has
coupled this antenna with a custom made low-noise amplifier developed for Pixel by Clifton Laboratories with very
high intermodulation distortion (IMD) specifications (OIP3 = +48 dBm, OIP2 > +100 dBm) that can operate without
saturating in high AM and FM broadcast band signal environments.