Device charge
20
19
En
En
Shooting
When shooting should pay attention to the following item:
When the camera lens focus function is set to be [ MF
],
the
camera
will
not
execute
focusing
action
if
half
-
press
the shutter release button of the view
receiver.
When the camera lens focus function is set to be [ AF
],
even receiving the
shooting signal the camera will not shoot
at
the
moment when most of camera
don
'
t seize
focus.
The
difference
between
[ ]
function
and
[ ]
function
are
as
following
: [ ]
function
is
,
the
shutter
release
button
is
pressed
fully
and
keep
on
,
shoot
every
second
and
stop
shooting
until
the
shutter release button was released. While
[ ]
function
is
,
the
camera
will
start
shooting
when
the
shutter
release
button
is
pressed
fully
until
press
it
again
,
the
shooting
will
stop
.
LV-122
When the battery power of device
is
low, the indicator
transmitter or the charge indicator of the view receiver) will flash red, you should replace
battery
or
recharge.
There
are
a
AC
charger
and
a
USB
charger
in the attachment which can charge the device
with these two modes.
(the power indicator of the view
1. Insert charge plug of
charger
into
the
charge
socket
of
the device
and
make sure it insert fully. And insert into AC power with other end of
charger and turn on device
,
after
about
four
seconds
,
the indicator (the
power indicator of the view transmitter or the charge indicator of the
view receiver) will flash green and start to charge the battery.
The indicator will not flash when charge on the condition you turn off the device
,
but
it
can
be charged.
You also charge the battery by USB included in the pack.
Please confirm the input voltage of charge is coherent with local voltage, otherwise may cause
destroy
of
product
even
estate lost or physical injury
.
2. After charge, the indicator
indicator of the Wired live view remote control) will keep green showing it charge fully.
(the power indicator of the view transmitter or the charge