13
1 2
2s
2s
Function mode setting
En
En
How to use the transmitter of Knight TR-331TX
How to use the transmitter of Knight TR-331TX
Turn on the Knight TR-331TX and camera’s power
1.
2. Turn on the Knight TR-331TX power, follow the figure to hold
[
POWER
] for 2s then release.
3. If Knight TR-331TX power is on, hold [
POWER
] for 2s
then release, Knight TR-331TX will enter into power
off mode.
4. All group will be defaulted as TTL mode after turn
on the power of Knight TR-331TX.
Turn on the Knight TR-331TX and camera power.
2s
A. Make sure your camera has been shut down or in
standby mode when set the function
.
This product
can
'
t support to set the function mode with the
camera in working
state
.
B. When the Knight TR-331product doesn’t work
normally, you can try to power off and then re-start
the device.
C. Turn on the Knight TR-331TX power and hold [SET]
button for 2s to set the function mode.
D. Knight TR-331 support to set five different groups,
the factory default
setting
of
them
is
working
under
TTL
mode
.
E. Hold the button [SET ]for 2s, enter to set different
function mode of groups, LCD display will show
[ ];gently press [
SET
] button once again to
