60
Problem
Possible Cause
Solution
No Picture
• HD MediaBox is not plugged in
• HD MediaBox has not been
switched on using the Remote
Control.
• USB>PC cable is still connected
• Video cables are not connected
• Your display is not capable of
accepting a 480p signal.
• Check power cable is connected
as per section 3.1. And that a
green light is showing on the front
panel of HD MediaBox.
• Ensure that the USB>PC cable
is disconnected before starting
HD MediaBox
• Ensure the correct video cables
are connected between the display
device and HD MediaBox (see
section 4.1
).
• Check that your display is capable of
accepting a 480p signal. If it is not,
follow the instructions in
section
10.1
to change the video output.
Network not working
• Ethernet cable is not connected
• Wrong network type selected
• IP address settings incorrect
• No shared folders or drives
available on your network
• Check the network cable is
plugged in on both HD MediaBox
and your network hub. A link light
should show up on HD MediaBox
if the cable is connected correctly.
• Refer to
section 5.4.5
to check
your IP settings in the Network
settings page.
• Make sure that you have setup at
least one shared folder or drive on
your network and that it is not
password protected.
HD MediaBox cannot
obtain IP Address
• DHCP server not running
• Ensure that there is a server or
device that acts as a DHCP server
on your network if you have set
DHCP in the IP Setting menu.
Remote Control not working
• No batteries, or batteries are flat.
• Infra Red Receiver on HD
MediaBox is obstructed
• Ensure that there are 2 AAA size
batteries in the Remote Control
and they are inserted correctly
(see
section 3.2
).
• Replace the batteries
• Ensure that the front panel of HD
MediaBox is not obstructed by any
objects and that you are pointing
the Remote Control directly at HD
MediaBox.
10. Troubleshooting
continued overleaf
Содержание hd Mediabox
Страница 1: ...Owner s guide Owner s guide...