Page | 20
X series | User manual
Warnings and notifications
Warning:
This is a class A product. In a domestic environment this product may
cause radio interference, which may require the user to take adequate
measures.
Important Radio frequency notification
s:
In case of using external third party antennas, the maximum gain
allowed for an attached antenna is 5dBi
Please note that certain limitations applies to the use of the WLAN radio
of this product in France, Italy and Latvia.
Pixavi recommends checking with local authorities for the latest status
of their national regulations for wireless LANs when selecting antennas
and access points.
FCC information
NOTICE:
This device complies with Part 15 of the FCC Rules [and with RSS-210 of
Industry Canada].
Operation is subject to the following two conditions:
(1)
this device may not cause harmful interference, and
(2)
this device must accept any interference received, including
interference that may cause undesired operation.
NOTICE:
Changes or modifications made to this equipment not expressly approved by
Pixavi may void the FCC authorization to operate this equipment.
Radiofrequency radiation exposure Information
*
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance of
20 cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
NOTE:
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
* Only valid for models ST5000, EX5000 and EX4000.
