Receiver Model
Modeling Lamp
STORM III
has a 40W LED modeling lamp whose brightness can be
steplessly adjusted.
● Short press the Modeling Lamp Button to choose the modeling lamp’s
mode from OFF, Percentage and PROP.
OFF:
Modeling lamp is off.
Percentage:
Adjust the modeling lamp's light brightness manually
from 1% to 100%.
PROP:
The modeling lamp's power changes with the flash's power.
The bigger power the flash has, the brighter the modeling lamp is.
Turn the Modeling Adjustment Button to choose the brightness from
1% to 100%.
Tips: Short press the Modeling Adjustment Button can quickly turn on/off the
modeling lamp.
Optical S1 Secondary Unit Setting
In M manual flash mode, press <
S1/S2
> button so that this flash can function
as an Optical S1 secondary flash with Optical sensor. With this function, the
flash will fire synchronously when the main flash fires, the same effect as that
by the use of radio triggers. This helps create multiple lighting effects.
to.1
M
ulti
CH
S
to.1
M
ulti
CH
S
%
Optical S2 Secondary Unit Setting
Press < S1/S2> button so that this flash can also function as an Optical S2
secondary flash with Optical sensor in M manual flash mode. This is useful
when cameras have pre-flash function. With this function, the flash will
ignore a single “preflash” from the main flash and will only fire in response to
the second, actual flash from the main unit.
to.1
M
ulti
CH
S
%
●
Choose the Modeling Lamp’s Modes
1. Short press the MENU Button until Fn menu is displayed.
2. Press the DIM Select Dial to choose F4.
3. Turn the DIM Select Dial to choose the Modes:
ON: the modeling lamp will keep this status
when triggering;
OFF: the modeling lamp will turn off when triggering;
Short press the MENU Button to exit.
-
15
-
-
16
-
to.1
M
ulti
CH
S
