Setting the Transmitter
Functions
Zoom setting
Multi Flash
ON/OFF
Number of groups
Beep
Send setting
values forcibly
APP mode
Custom
Functions No.
Settings and Description
Changing with camera's Zoom value. Flashes' auto
zoom functions should be turned on.
Zoom
（
20/24/28/35/50/70/80/105/135/200 mm)
PC sync socket connects with camera
PC sync socket connects with flash
Multi flash OFF
Multi flash ON
The minimum power output in M/Multi mode is 1/128
The minimum power output in M/Multi mode is 1/256
A/B/C
A/B/C/D/E
ON
OFF
Only send after the setting values have been changed.
Forcibly send the setting values before firing even
though the values has not been changed.
The transmitter is in the master mode, which can set
the receiver’s mode and output on the transmitter end.
Open the APP mode and the transmitter can only trigger
flashes. Only channel and custom settings can be
adjusted and the LCD panel will display APP.
Setting Signs
AU
20,24,28,35,50,
70,80,105,135,200
in
ou
--
on
1/128
1/256
03
05
--
on
--
on
--
on
PC sync socket
connects with camera
/camera flash
Minimum power
output
in M/Multi
mode
C.Fn-02
C.Fn-03
C.Fn-04
C.Fn-05
C.Fn-06
C.Fn-07
C.Fn-08
C.Fn-09
-
16
-
-
15
-
1. Press the <CH
/
OK> Button for 2 seconds or longer until <Fn> is displayed.
2. Select the custom function No.
* Turn the Select Dial to choose the Custom Function No.
3. Change the Setting.
* Press the <GR> Button until the custom function No. blinks.
* Turn the Select Dial to set the desired number. Pressing <GR> button will confirm
Setting the Transmitter
the settings.
* Press <MODE> button to exit the C.Fn settings.
Setting the Camera
To trigger
ST-III T-S
, please set camera's flash mode to fill flash, auto flash, slow
flash or rear curtain flash.
ST-III T-S
cannot be triggered when the camera is set to wireless lighting mode (WL).
Flash
Mode
SLOW
REAR
WL
Fill
-
flash
Fill
-
flash
Flash
Mode
SLOW
REAR
WL
Wireless
Wireless
