Pixapro ST-III Plus-N Скачать руководство пользователя страница 5

Setting the Flash Trigger 

Slide the Power Switch to ON, and the device is on and status indicator lamp will not 
reveal. 

Note: 

In order to avoid power consumption, turn off the transmitter when not in use. 

Power Switch

1. 

The system will automatically enter standby mode after stop operating the 

transmitter over 60 seconds. And the displays on the LCD panel disappear now.

2.

Press any button to wake up. If the flash trigger is attached to the hot shoe of 

Nikon camera, half press the camera shutter can also wake the system up.

Note:

 If do not want to enter power saving mode, press the <MENU> button to enter C.Fn custom 

settings and set STBY to OFF. 

Automatically Enter Power Saving Mode

Slide the AF-assist beam switch to ON, and the AF lighting is allowed to output.

When the camera cannot focus, the AF assist beam will turn on; when the camera can 

focus, the AF assist beam will turn off.

Power Switch of AF Assist Beam

Channel Setting

Change the wireless channels and wireless ID to avoid interference for it can only be 

triggered after the wireless IDs and channels of the master unit and the slave unit are 

set to the same. 

Press the <

MENU

> button to enter C.Fn ID. Press the <

SET

> button to choose OFF 

channel expansion shutdown, and choose any figure from 01 to 99. 

Note: It can only be used when the slave units have the wireless ID settings functions. If they do not 

have, please set the ID to OFF.

Wireless ID Settings

Mode Setting

1. 

 After pressing the group button to select one 

group, press the <

MODE

> button and all the current 

group’s mode will be changed by the order of 

TTL/M/--

.

Note: Only A/B/C group can be set to TTL mode, the rest two 

groups can only be set to M/-- mode.

2. 

 In normal situation, press the <

MODE

> button to 

switch the multi-group mode to MULTI mode. Press 

the group selection button and then press the 

<MODE> button can set the MULTI mode to ON or 

OFF.

Setting the Flash Trigger 

CH 01

A
B
C

M

1

/128

CH 01

A
B
C

ON

1

/128

ON

1Hz

1Times

08

 -

1.

 Short press the <MENU> button and choose CH to set the channel value.

2.

 Turn the select dial to choose the appropriate channel. The channel value will be 

confirmed after exiting the menu.

3.

This flash trigger contains 32 channels which can be changed from 1 to 32. Set the 

transmitter and the receiver to the same channel before usage.

-  

07 -

Содержание ST-III Plus-N

















Отзывы: