
7
2. Installation
First, plug the
AC adapter
in the DEVICE. Its plug is located on the side of the device. Then, plug
the AC adapter to a
power line
.
To power on the device, move the switch
button
located on the side of the device, on the left.
After that, the device should display a
logo
on its screen. Wait for a while, the device needs
about 30 seconds before being ready to be used.
3. Introduction to the main interface
After you power the device on and wait for a while, pictures should be displayed.
Using the buttons behind the device, you can enter the menus and browse them. To open the
main menu, press the
Menu
button twice. To enter the desired menu, press the button.
Note
: The
Back
button on the remote control allows you
to go back to the previous menu or to leave the main
menu.