• To setup the Video recording Resolution
Hold Front Pivot Switch down for 4 seconds (Light blinks three times). Resolution
has been changed
720p@60fps = Blue light blinks three times
720p@30fps = Red light blinks three times
1080p30fps (Default) = Red and Blue light blink three times together
• To setup the Video recording Focus
Hold Back Pivot Switch down for 4 seconds (Light blinks three times). Focus
setting has been changed
Auto Focus (AF) = Red light blinks three times
Fixed Focus (FF) = Blue light blinks three times
Continuous Auto Focus (CAF) = Red & Blue light blink three times together
Note: You must use the Control Setting software to change into Macro Focus
(MF)
b) Take Still Shots
Short Press (<2s) and release the Back Shutter Button (
B2
). The recorder’s Red
recording LED light (
C
) will flash quickly indicating focus then one slow flash
indicating that picture is taken.
Remark: A long press will change the Video Recording Focus
‣
See
PHOTO RESOLUTION MODES
for more information
c) Real Time Clock
The Pivothead Recorder is equipped with a Real Time Clock features. You do
not need to set up the date into the device. Just plug the glasses into the
computer, launch the computer Application (Please refer to Chapter 4). The time
in your Glasses is updated to match your computer’s time.
If the time indicated on your recording or picture is incorrect, please proceed as
indicated above. Ensure also that your computer time and date is correct.
d) Auto Power Off
The Pivothead HDHF Recorder is programmed to automatically turn OFF after a
period of inactivity of 2 minutes, to protect battery life time. The Blue LED will turn
OFF. Just Press the Power Button once to turn ON the device.
