ES2000 SERIES ELEVATION TABLE
6
ES2000 Series Elevation Table
PRECAUTIONARY INSTRUCTIONS
DO NOT
operate these tables in an environment where other devices are being used that
intentionally radiate electromagnetic energy in an unshielded manner. Portable and mobile
RF communications equipment can affect Medical Electrical Equipment.
• This table generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to
other devices in the vicinity. However, there is no guarantee that interference will
not occur in a particular installation. Harmful interference to other devices can be
determined by turning this table on and off. Try to correct the interference using
one or more of the following: reorient or relocate the receiving device, increase the
separation between the equipment, connect the equipment to an outlet on a different
circuit from that which the other device(s) are connected, and consult the Pivotal
Health Solutions Service Department for help.
• Inspect all cables and connectors before each use.
• Always assist the patient on and off the treatment table to avoid falls.
• Always monitor patients closely during treatment.
• The table’s maximum safe working load is 400 pounds. Never exceed the maximum load limit.
• Do not permit any foreign materials or liquids to enter the unit. Take care to prevent any
foreign materials including, but not limited to, inflammables, water, and metallic
objects from entering the unit. These may cause unit damage, malfunction, electrical shock
fire or personal injury.
• Do not use a damaged Mains Power Cord. Using a damaged Mains Power Cord may cause
unit damage, malfunction, electrical shock, fire, or personal injury. If the Mains Power Cord
becomes damaged, discontinue use immediately and contact the dealer for replacement of
the Mains Power Cord.
• Do not enclose/block/cover outlet. This is an indication of power status
CAUTION:
• Read, understand and practice the precautionary
and operating instructions found in this manual.
Know the limitations and hazards associated with
your new treatment table. Observe any and all
precautionary and operational decals placed on
the unit.
• Keep table out of high moisture areas.
• This unit should be operated, transported and
stored in temperatures between 40° F (4.4° C) and
100° F (37.8° C), with relative humidity ranging from
30% - 80%..
