3.
Align device camera and buttons with the
corresponding access points in the case body and
press the corners of the device into the case in the
order shown. The device will snap securely into the
case’s perimeter seal.
Installing Device
Beginning with the bottom edge near the charging
port, press firmly using your thumbs to disengage
the case seal. Continue carefully pressing around the
edges of the case to release the device in the order
shown. Do not attempt to pry or force the device
from the case.
1. Start at the bottom and move left
2. Continue around the top edge
3. Release the right edge to remove device
Removing Device
!
WARNING!
Do not use excessive force or
tools of any kind during install or
removal of device. Doing so may
cause damage or personal injury.
!
Pro Tip!
Open the ID window and write
your info on the ID card before
installing the device.
2
1
3
4
1
2
3
Top
Bottom
Left
Right
