![Pivitec E16i Скачать руководство пользователя страница 9](http://html1.mh-extra.com/html/pivitec/e16i/e16i_quick-start-manual_1560413009.webp)
3
Making Audio Connections
NOTE: Always make audio connections with the device powered off to avoid any
loud transients that might damage other equipment or could cause hearing damage.
E16i Analog Input Modules
The e16i has 16 balanced TRS mono connections on the back panel for connecting
audio input sources. Use appropriate cables to connect your audio sources to the
inputs on the e16i and set the Input Pad switch on each channel (+4dBV/-10dBu)
to match the signal level of the input source. If there is more than one e16i in the
system repeat this step for each e16i. You will use the v2Mix® Pro app to
"connect" these signals to the desired Channel Bank on the e32 mixer later in this
guide.
E32 Mixers
In addition to the Headphone Jack on the front panel, the e32 has balanced 1/4"
TRS Stereo Line Level outputs on the rear panel as well as a 3.5mm stereo line
input on the front panel. Connect your headphones or in-ear phones to the
headphone jack on the front panel. For use with wireless IEM systems, connect the
balanced line level outputs on the rear panel to the appropriate inputs on your
wireless IEM transmitter. NOTE: It may be necessary to adjust the input sensitivity
of your transmitter to prevent clipping and reduce noise levels. Consult the manual
for your transmitter for instructions.
Both the Headphone Output and Stereo Line Level Outputs are active at the same
time. Both are simultaneously controlled by the Master Volume control in the
v2Mix® Pro Control Application. These outputs are driven by a high quality
Voltage Controlled Amplifier (VCA) for low noise levels and optimum headroom.
Digital Network Audio Interfaces
Pivitec's other Network Audio Interfaces, such as the e16i ADAT and e16i/o MY
Card are digital interfaces and do not have analog audio connections. Please see the
instructions included with those devices for proper connection to your sound
system.
Connecting to other Ethernet AVB Network Devices
Using your Pivitec e32 Mixers with other AVB Network Devices (such as AVID
S3L consoles) requires the use of a compliant AVB Network switch. Pivitec has
more information on compatible switches as well as instructions for connecting to
the Avid S3L console at
our website
. You can also contact
Pivitec support
for
further information.