Piusi E300, Инструкция по установке, эксплуатации и обслуживанию

Страница: 10 / 21

45
/124 45
/56
EN
This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.
E300
ENGLISH (Translated from Italian)
L INSTALLATION
L1 ASSEMBLY
ATTENTION
PRELIMINARY
INSPECTION
The pump must never be operated before the delivery and suction lines
have been connected.
- Verify that all components are present. Request any missing parts from
the manufacturer.
- Check that the pump has not suffered any damage during transport or
storage
- Carefully clean the suction and delivery inlets and outlets, removing any
dust or other packaging material that may be present
- Check that the electrical data corresponds to those indicated on the data
plate
ATTENTION
THE MOTORS ARE NOT OF THE ANTI-EXPLOSIVE-TYPE.
POSITIONING For detailed machine assembly instructions, refer to the exploded view:
For machine assembly and installation, always keep the same position indicat-
ed on the exploded diagram in this manual.
Take care to ensure that the unit is installed in a well-ventilated and illumi-
nated environment.
The pump can be installed in any position (pump axis vertical or horizontal)
Attach the pump using screws of adequate diameter for the attachment holes
provided in the bracket of the pump (see section "OVERALL DIMENSIONS"
for their position and dimension).
L2 HYDRAULIC CONNECTION
NOTE Before connecting, make sure that the hoses and the suction tank are free
of dirt and thread residue, which could damage the pump and accessories.
ATTENTION
Before connecting the delivery hose, partially fill the pump body with the
liquid that needs to be pumped (do not allow the pump to run dry during the
priming stages).
ATTENTION Do not use conical threaded joints that could damage the threaded pump
openings if excessively tightened.
The MINIMUM recommended characteristics for hoses are as follows: