Page 2
For technical questions, please call 1-888-866-5797.
Item 64042
Specifications
Rated Capacity
10,000 lb.
IMPORTANT SAFETY INFORMATION
1. Study, understand, and follow all instructions
before operating this device.
2. Wear eye protection that meets ANSI/ISEA Z87.1
and OSHA standards.
3. Do not exceed rated capacity.
4. Make sure setup is stable and secure
before performing any work.
5. Failure to heed these markings may result in
personal injury and/or property damage.
6. No alterations or modifications shall
be made to this product.
7. Keep work area clean and well lit.
8. This product is not a toy. Do not allow
children to play with or near this item.
9. Do not operate when tired or when under the
influence of alcohol, drugs or medication.
10. Avoid moving parts while using the Ram. Once unit
is set in place keep fingers and hands away from
contact areas. If unit needs to be moved, release
pump pressure, move, and resume pumping.
11. Wear heavy-duty work gloves during use.
12.
Be aware of dynamic loading!
Sudden load movement may briefly create
excess load causing product failure.
13. Replacement parts and accessories.
When servicing, use only identical replacement
parts. Only use accessories intended for use
with the pull back ram. Approved accessories
are available from Harbor Freight Tools.
14. Store idle equipment. When not in use, the pull
back ram should be stored in a dry location to
reduce rust. For safety, store the pull back ram
in a locked cabinet, out of reach of children.
During long term storage, coat the exposed
chrome area of the ram with a protective lubricant
(such as silicon spray) to prevent rust damage.
15. Keep coupler valves protected when not in use.
Dust caps are included for all coupler
valves and should be screwed in when not
in use to keep the equipment clean.
16. Use as intended only.
17. Inspect before every use; do not use
if parts are loose or damaged.
18. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
Assembly
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
End
Plug
Figure A: Removing End Plug
1. Unscrew and save the End Plug located on the
end of the Coupler as shown in Figure A.
Pump
Hose
Figure B: Connecting Hose
2. Securely screw the Hydraulic Pump Hose (not
included) into the Coupler as shown in Figure B.
3. Refer to the Hydraulic Pump (sold separately)
instruction manual for pump assembly instructions.
