background image

Page 2

For technical questions, please call 1-888-866-5797.

Item 63397 

        

S

AFET

y

Op
ERA

TION

M

AINTENAN

c

E

S

ETU

p

Table of contents

Important Safety Information ...................... 2
Specifications ............................................. 3
Setup – Before Use .................................... 4
Operation .................................................... 6

Cleaning, Maintenance, and Lubrication .... 8
Troubleshooting .......................................... 9
Parts List and Diagram .............................. 10
Warranty .................................................... 12

WARNING SyMBOLS AND DEFINITIONS

This is the safety alert symbol.  It is used to alert you to potential 

personal injury hazards.  Obey all safety messages that 

follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,  

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,  

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,  

could result in minor or moderate injury.

Addresses practices not related to personal injury.

IMpORTANT SAFETy INFORMATION

Failure to heed these markings may result in personal injury and/or property damage:

1.  Study, understand, and follow all instructions 

before operating this device.  

2.  Do not exceed 1500 lb. rated capacity. 

3.  Use only on hard, level surfaces. 

4.  Load saddle equally.

5.  Lifting device only.  Immediately after lifting, 

support the vehicle with appropriate means.

6.  Do not adjust safety valve.  

7.  Wear ANSI-approved safety goggles and 

heavy-duty work gloves during use. 

8.  Keep clear of load while lifting and lowering.

9.  Lower load slowly. 

10.  Do not use for aircraft purposes. 

11.  Lift vehicle only at manufacturer-

recommended locations.

12.  Inspect before every use; do not use 

if parts are loose or damaged. 

13.  Secure load with appropriate restraint device.

14.  Immediately after lifting load, ensure that Lift’s 

mechanical load holding means is engaged. 

15.  Do not move or dolly the vehicle while on the Lift.

16.  No alterations shall be made to this product. 

17.  Keep hands away from the Lift Arm (9) 

when raising or lowering the Lift. 

Содержание 63397













Отзывы: