Page 3
SKU 92349
For technical questions, please call 1-888-866-5797
9.
Maintain tools with care
. Keep tools clean for better and safer performance. Follow
instructions for lubricating and changing accessories. Inspect tool cords periodically
and, if damaged, have them repaired by an authorized technician. The handle must
be kept clean, dry, and free from oil and grease at all times.
10.
Disconnect power. Unplug tool when not in use.
11. Avoid unintentional starting
. Be sure the Trigger is in the Off position when not
in use and before plugging in. Do not carry any tool with your finger on the trigger,
whether it is plugged in or not.
12. Stay alert. Watch what you are doing, use common sense. Do not operate any tool
when you are tired.
13. Check for damaged parts. Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment and binding of moving parts; any broken parts
or mounting fixtures; and any other condition that may affect proper operation. Any
part that is damaged should be properly repaired or replaced by a qualified technician.
Do not use the tool if any Trigger does not operate properly.
14. Guard against electric shock. Prevent body contact with grounded surfaces such
as pipes, radiators, ranges, and refrigerator enclosures. Use caution near batteries
and starters.
15. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use accessories
intended for use with this tool. Approved accessories are available from Harbor
Freight Tools.
16.
Do not operate tool if under the influence of alcohol or drugs
. Read warning
labels if taking prescription medicine to determine if your judgment or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the tool.
17. Maintenance
. For your safety, service and maintenance should be performed
regularly by a qualified technician.
18. People with pacemakers should consult their physician(s) before using this
product.
Electromagnetic fields in close proximity to a heart pacemaker could cause
interference to or failure of the pacemaker.
19. Use this tool with both hands
. This tool requires the use of both hands when
operating. This helps maintain tool stability and keeps hands away from the working
area of the tool.
20.
This unit should only be powered by 12 Volt DC systems.
Note: Performance of this tool may vary depending on variations in battery power.
Warning: The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be under-
stood by the operator that common sense and caution are factors which cannot be
built into this product, but must be supplied by the operator.
Содержание 92349
Страница 1: ......
