PITSOS PSI09VW31, Руководство пользователя, Страница: 6 / 18

Function buttons(continued)
14
7 8
Indicators on LCD
15
LOCK Button
LED/FOLLOW ME Button
Disable/Active indoor screen Display. When
pushing more than 2 seconds, the FOLLOW
ME function will be activated, pushing more
than 2 seconds again to disable.
,
,
Transmission Indicator
Temp./Timer display
Fan speed display
Sleep Display
Mode display
ON/OFF display
This transmission indicator lights when remote
controller transmits signals to the indoor unit.
Displays the current operation mode. Including
auto( ), cool( ), dry( ), heat( ) (Not
applicable to cooling only models), fan( )
and back to auto( ).
O O O O
Displays the t emperature s etting(17 C/62 F~30 C/88 F).
When you s et t he o perating m ode to FA N, no tem perature
setting is displayed. And
the ON and OFF settings of the TIMER.
if in the TIMER mode, shows
Displayed by pressing the ON/OFF button.
Press the ON/OFF button again to remove.
Displays the selected fan speed, AUTO(no display)
and three fan speed levels " " (LOW) " " (MED)
" " (HIGH) can be indicated. The fan speed is AUTO
when the operating mode is either AUTO or DRY.
Displayed under sleeping operation.
Press the SLEEP button again to remove.
Note:
of clear presentation. But during the actual operation
only the relative functional signs are shown on the
display window.
All indicators shown in the figure are for the purpose
Lock Display
Displayed when LOCK mode is activated.
FOLLOW ME Display
Displayed when FOLLOW ME function is activated.
1
2
4
5
3
9
10
8
6
7
11
12
13
14
15
TURBO
SELF
CLEAN
SLEEP
FRESH
SHORT
CUT
TIMER
ON
TIMER
OFF
LOCK
RESET
LED
FOLLOW
ME
FAN
SPEED
DIRECT
SWING
MODE
TEMP
When you press the recessed LOCK button,
all current settings are locked in and the
remote controller does not accept any
operation except that of the LOCK. Press
again to cancel the LOCK mode.
NOTE:
Buttons design might be slightly
different from the actual one you
purchased depending on individual
models.
All the functions described above
are accomplished by the indoor unit,
if the indoor unit has no this feature,
there is no corresponding operation
happened when press the relative
button on the remote controller.
F
auto cool dry heat fan
sleep follow me lock run
SET TEMP. TIMER ONOFF
TIMER OFF Button
13
Press this button to initiate the auto-off time
sequence. Each press will increase the
auto-timed setting in 30 minutes increments.
When the setting time displays 10H, each
press will increase the auto-timed setting
60 minutes increments. To cancel the
auto-timed program, simply adjust the
auto-off time to 0.0
ON/OFF