12
GMW1100W-001_v01
Kitchen timer
1
Press the
Kitchen Timer
button „
” will start flashing on the display.
2
By means of the numeric keypad, set the time for the timer. The maximum time which
can be set for the timer is 99 minutes and 99 seconds.
3
Set the
START/+30SEC.
button to confirm the setting and to start the countdown.
4
Irrespective of whether the door is closed or open, after the set time has elapsed,
a five-time sound signal will be heard. If the clock has been set earlier (12-hour display
mode), the current time will appear on the display.
The kitchen timer is a separate operating mode of the microwave oven,
independent from the clock.
During the countdown, no other oven programme can be set.
Each programme can be stopped by pressing the STOP/Cancel button,
by pressing the button twice you will end the programme. To resume the
stopped programme, press the START/+30SEC. button.
Auto menu
The microwave oven has the auto menu pre-set for cooking certain products: popcorn,
potatoes, pizza, frozen vegetables, beverages, food on plate.
Each auto menu programme has several weight or volume options with the appropriate
cooking time.
AUTO MENU TABLE
PROGRAMME
PRODUCT WEIGHT,
VOLUME
COOKING TIME [s]
Popcorn
50 g
0:55
100 g
2:00
Potato
(Potatoes)
1 (230 g)
4:00
2 (460 g)
8:00
3 (690 g)
13:00
Pizza
100 g
0:40
200 g
1:10
400 g
2:30
Frozen Vegetable
(frozen vegetables)
150 g
4:00
350 g
8:00
500 g
11:00
Beveraga
(beverages)
1 (120 ml)
1:00
2 (240 ml)
2:00
3 (360 ml)
3:00
Dinner Plate
(Food on
plate)
250 g
3:30
350 g
4:30
500 g
6:00
EXAMPLE
In order to set the auto menu for defrosting 350 grams of vegetables, complete the
following steps:
1
Press the
Frozen Vegetable
button until „
” appears on the display (in this case,
press the button twice).
2
Press the
START/+30SEC.
button to start defrosting. The end of the defrosting will be
signalled by a five-time sound. If the clock has been set earlier (12-hour display mode), the
current time will appear on the display.
Memory function
The microwave oven has a built-in memory function which saves the programmed cooking
values (power level and cooking time).
1
Press the
0/Memory
button to select one of the available memory cells (3 memory
cells are available). The display will show „ ”, „ ” or „ ”.
2
If the memory cell has been set earlier, press the
START/+30SEC.
button to use it.
However, if the memory cell has not been set earlier, continue the setting process. One or
two cooking stages may be set.
3
After completing the setting process, press the
START/+30SEC.
button to confirm the
settings. The display will show the number of the memory cell in which the programme has
been saved. Press the
START/+30SEC.
button again to start the programme.
EXAMPLE
In order to set the programme for cooking for 3 minutes and 20 seconds at the 80%
microwave power level and to save it in memory cell “2”, complete the following steps:
1
Press the
0/Memory
button twice, the display will show „ ”.
2
Press the
Time Cook
button and then enter the cooking time by means of the numeric
keypad – press in turn “
3
,
2
,
0
”.
Microwave cooking
1
Press the
Time Cook
button. The display will show „
”.
2
Enter the time of microwave cooking by means of the numeric keypad. The maximum
cooking time is 99 minutes and 99 seconds.
3
Press the
Power
button, the display will show „
”. The default power setting is
100%.
4
Press the appropriate button on the numeric keypad to set the desired power level.
5
Press the
START/+30SEC.
button to start the cooking.
EXAMPLE
In order to set the cooking time for 15 minutes at the 50% microwave power level, perform
the following steps.
1
Press the
Time Cook
button, the display will show „
”.
2
By means of the numeric keypad, enter the cooking time, enter in turn “
1
,
5
,
0
,
0
”
(15 minutes).
3
Press the
Power
button, then press the “
5
” button on the numeric keypad in order to
set the microwave power level to 50%.
4
Press the
START/+30SEC.
button to start cooking.
If the STOP/Cancel button is pressed while setting the cooking time or
microwave power level or no action is taken for 1 minute, the settings will
be automatically restored to the previous values.
After selecting the 0% power level, the microwave oven will operate without
microwaves, with the fan turned on. The 0% power level can be used for
removing unpleasant odours from the oven cavity.
During microwave cooking, you can change the set microwave power level.
Press the Power button, the current power level setting will appear on the
display for 3 seconds, during that time set the new power level by means of
the numeric keypad.
MICROWAVE POWER TABLE
Display
PL10 PL9 PL8 PL7 PL6 PL5 PL4 PL3 PL2 PL1
PL0
Microwave
power
100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0%; fan
turned on
Button on
numeric
keypad
1+0
9
8
7
6
5
4
3
2
1
0
Quick start
1
When the microwave oven is in the standby mode, press the
START/+30SEC.
button
to start cooking for 30 seconds at the full power, each time you press the
START/+30SEC.
button the cooking time will be extended by another 30 seconds. The maximum cooking
time is 99 minutes and 99 seconds.
2
When the microwave oven is in the standby mode and one of the buttons on the
numeric keypad from the range 1 to 6 is pressed, the oven will start to operate at the full
(100%) power level for 1, 2, 3, 4, 5 or 6 with respect to the button which has been pressed.
Press the
START/+30SEC.
button to extend the time by another 30 seconds.
3
During microwave cooking or defrosting by time, each time you press the
START/+30SEC.
button the cooking time will be extended by another 30 seconds.
Defrosting by weight
1
Press the
Weight Defrost
button, the display will show „
”.
2
By means of the numeric keypad, enter the weight of the food to be defrosted in grams.
The power level and the cooking time will be automatically set according to the weight. The
weight entered must be within the range from 100 g to 2000 g.
3
Press the
START/+30SEC.
button to start defrosting. A single sound signal will be
heard and the remaining defrosting time will be visible on the display.
Defrosting by time
1
Press the
Time Defrost
button, the display will show „
”.
2
By means of the numeric keypad, enter the defrosting time. The time entered must be
within the range from 00:01 to 99:99.
3
The default power level for defrosting by time is set to 30%. In order to change the
power level, press the
Power
button (the display will show „
”), and then select the
new power level by means of the numeric keypad.
4
Press the
START/+30SEC.
button to start defrosting. A single sound signal will be
heard and the remaining defrosting time will be visible on the display.
