PITSOS GHB1220B, Руководство пользователя, Страница: 17 / 22

17
2 Put the food to be processed into the container. Fill in the
container. Do not exceed the marked MAX level.
3 Put the cover-transmission on the container. Make sure
the protrusions fit the openings in the container and turn the
lid clockwise until stop.
4 Place the blender motor in open position on such
assembled mini food processor, in accordance with the
indicator on the motor casing and the lid of the mini food
processor including gearbox.
5 Turn the motor clockwise relative to the transmission
(according to the direction of the arrow) until you hear a click
(the indicator on the transmission should be in the closed
position ).
6 Plug in the appliance.
7
Switch on the appliance pressing the switch (2) .
8 Set the required gear as necessary.
●
When finished, turn the appliance off and unplug it by
disconnecting the cable cord from the power outlet.
●
The dismantling process should be done in reverse order
to assembly.
The mini food processor blades are very
sharp. Be very careful during assembling,
disassembling or during cleaning. Store the
knife inside the cover for safety reasons.
It is not allowed to grind too hard products,
such as: coffee beans, nutmeg, ice cubes.
Before shredding big pieces of the products
cut them into smaller ones – approximately
1 cm cubes.
Never disassemble the lid from the container
before the disc stops rotating.
Do not start – up the motor without accessories.
Operational guidelines
●
If the products stick to the blade or the walls of the
container:
–
Switch off the appliance.
–
Remove the drive with the lid and container of ice or
other products crusher.
–
Remove the products out of the mini food processor
walls.
–
Re-assemble the appliance – as defined above,
Continue the operation.
Approximate time for processing of selected
products for the recommended gear
Product
Recommended
speed
Processing
time
cheese
200 g
(500 ml)
TURBO 20-30 secs
meat
250-300 g
(400-500 ml)
TURBO 25-30 secs
onions
250 g
(500 ml)
8-10 15 secs
almonds
300 g
(500 ml)
15
/ TURBO
40 secs
+ 5 secs
garlic 300 g 15 10 secs
walnuts
200 g
(500 ml)
15
/ TURBO
15 secs
+ 5 secs
herbs
20 g
(500 ml)
TURBO 30 secs
You can shorten the processing time as you wish, then you
obtain other granulation of grinded products.
OPERATING THE FOOD PROCESSOR
The appliance characteristics
Hand blender is equipped with a food processor which is
used for chopping, liquidizing, slicing, and grating fruits and
vegetables.
The application of the food processor accessories
Double – sided slicing disc – is used to slice fruit and
vegetable (raw, boiled) into thin or thick slices. The slicing
disc is round, with double -sided blades (one side for thin
slices, the other side for thick slices).
Double – sided chipping and puree disc – is used for
chipping and pureeing fruit and vegetables. Chipping and
puree disc is round, with double -sided blades (one side for
chipping i.e. carrots, celery boiled beetroots, the other side
for pureeing – i.e. for potato pancakes, beetroot salad).
Disc driver – is used for assembling discs (for slicing,
chipping and pureeing).
Pusher – is used for pushing product grinded with all discs
and closing the lid feed chute.
Use permanent guard for all shields of the food
processor.
Preparing the food processor to use
Before assembling on and removing the
blender drive out of the food processor, make
sure that the plug of the supplying cord is
disconnected from the mains supply outlet.
Operate the blender so, that the closed/open markings
located on the appliance are well visible .