5
GBS13000-001_v01
Handling and operation
1
Insert the battery CR2032 into batteries compartment,
then place the appliance at flat horizontal firm surface.
2
Stand on it, the appliance shall switch on automatically
and indicate body weight. The measurement result shall be
saved after it is set.
3
The appliance shall switch off automatically if untouched
for 10 seconds after zero is displayed.
If the display shows “
”, it means that the
batteries are almost worn out and should be
replaced with new ones.
Before you use remove the isolation from the
battery. Please take note to the polarity. If the
scale does not operate after you remove
the insulation strip, take off the battery and
re-install it.
When “
”
is shown on the display, the user may choose the
unit for measurement by pressing again the measurement
unit selection button (kg /lb/ st).
Ecology – Environment protection
Each user can contribute to protect the
environment. It is neither difficult nor
expensive. In order to do so:
Return cardboard packages to recycling points.
Throw polyethylene (PE) bags into appropriate
containers.
Batteries contain substances harmful to the natural
environment. Do not throw them away with other household
waste. Return used batteries to recycling points. Before
disposing of or returning the appliance to a recycling point make
sure to remove the batteries from the battery compartment.
Return a worn out appliance to an appropriate collecting
point as the components of the appliance may pose a threat
to the environment.
Do not dispose the appliance with the municipal waste!
The manufacturer does not accept any liability for any damages
resulting from unintended use or improper handling.
The manufacturer reserves his rights to modify the product any time
in order to adjust it to law regulations, norms, directives, or due to
construction, trade, aesthetic or other reasons, without notifying in
advance.