4
Electric Energy Prop Racer User Guide
58544
V0912
P.O. Box 1708 • Pittsburg, KS 66762
shop.pitsco.com
Toll-Free Orders 800-835-0686
11. Secure the battery holder about 1/2" behind the small strip of balsa wood
by placing double-sided tape on its base (Figure 8). Push the propeller
onto the front shaft of the motor and slide the motor into the mount. The
two leads should be pointed toward the battery holder.
12. Use two AA batteries in the battery holder. To activate the racer, crimp the
alligator clips to the leads of the motor.
Caution: When the batteries are inside the holder, keep the alligator clips
from touching. Designate a specific area to attach one of the alligator clips
(on the front wheel or the side rail) so they do not touch one another.
Allowing them to touch will result in a heat transfer that could cause
burning.
Your Electric Energy Prop Racer is ready to roll! To change the direction of the
racer, switch the alligator clips to crimp onto the opposite leads.
Figure 8
