Pitney Bowes W863, Руководство пользователя

Страница: 23 / 66

Adjust Input Media Stop
Operation
There are two adjustments on the input media stop: height and depth.
To adjust the height:
l
Loosen the knob on the side of the input media stop and slide the plate up or down. For 1/16”
(1.6mm) thickness, slide a sample mail piece under the balls and lower the media stop to the
point of contact and then lock. For over 1/16” (1.6mm) thickness, set the media stop low enough
so that mail piece cannot get below the edge of the media stop and then lock.
To adjust the depth:
l
There is a scale on the input media stop that is used to set up for different size mail pieces.
Loosen the two knobs and set the knobs to the desired value on the scale. Tighten the knobs
when you are finished.
Stacker Adjustments
Pitney Bowes User Guide September 2021 23