5
Apply Power to Communication Device
4
6
Check LED
After 45 seconds, the right LED will blink
orange
, go to Step 7.
Install Communication Device
Troubleshooting 1
The Communication Device may not be communicating to an active network port.
Try the following:
•
Be sure the Network Cable
( )
is properly connected at both ends.
•
Try other ports (for 10 seconds each) until you find one that is active
(LED changes from solid orange to
green
). Do not use a network port in a
computer.
•
Pull the power connector
( )
out, then reconnect power to restart the
Communication Device.
•
If after 45 seconds, the right LED is still not blinking
orange
only, consult
your IT specialist. Your IT specialist may need to follow the Special Network
Settings procedure in this booklet.
For more detailed technical assistance, go to:
www.pb.com/support/LAN
LEDs
If the right LED is solid
orange
(not blinking), follow Troubleshooting 1, below.
Plug the AC adapter ( ) into the Communication Device and a
power outlet. The left LED is lit
yellow
when it is on.
LEDs
AC Adapter
Communication
Device
