2
Locate
the plug
ports
under the
front of the scale
and plug in the small end
of the power cord.
4
If you're
using a
Pitney Bowes
meter, plug the small end of the scale-meter
interface cable into the scale port.
6
7
8
Lift the
platter,
remove the
packing
material,
and replace
the platter on the scale.
Tuck the
cord(s)
under the
guides on the
bottom of the
scale.
9
If you're using a Pitney Bowes meter, connect
the large end of the scale-meter interface
cable to your meter's communications port.
Tighten the thumbscrews securely. See the
meter's operating guide for the location of
the port.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Level the scale by turning the scale feet until
the leveling bubble is centered and the scale
does not wobble.
Remove packing.
Level the scale.
Locate the plug ports.
Connect scale-meter interface
cable to scale.
Tuck the cord(s) under the
guides.
Connect scale-meter interface
cable to meter.
;;
;;
Adjustable
Feet (4)
5
Bubble
must be
in center.
or
