3-16
3 • Running Mail
SV62415 Rev. B
Adding Postage to Correct a Mail Piece
This procedure is used if you have applied the incorrect amount of
postage and need to make a correction to ensure that a mail piece
has sufficient postage.
1. At the Home screen:
• Press
Menu
and select “Printing Options”.
• Select “Postage Correction Mode”.
• Key in the postage correction using appropriate decimal places.
Please note that your machine may display a range where a
postage amount within a set range cannot be keyed in. For
example $0.57 to $3.49 is representative of the current Canada
Post Lettermail rate structure - these values will be adjusted
based on future Canada Post Rate Changes. If a value between
$0.57 and $3.49 (the restricted range at time of publication) is
entered, the system will indicate that this is an invalid entry and
therefore will not print the indicia.
2. Press
Enter
or choose
Accept
.
Correct Postage
Enter Postage Amount:
$0.57 ~ $3.49 Invalid
Accept
3. Run the mail piece through the system so the that indicia prints
on the upper right hand corner of the back side of the envelope
(opposite of where initial indicia is printed). Alternatively, you can
use a tape sheet to print the correction indicia and place it to the
left of the original indicia (for parcels) or as instructed above for
letters.
