AddressRight® DA400 Printer
Page 4 of 8
Installation Instructions
SV61187 Rev. B
Page 5 of 8
AddressRight® DA400 Printer
Installation Instructions
SV61187 Rev. B
Assembling the
Printer
(continued)
2. Installing the Wire Frame Assembly (continued)
E. Remove the Clamp Knob
and the nylon washer from
the printer and save for in-
stallation of the Wire Frame
Assembly.
F. Lower the Wire Frame As-
sembly. Align the slot in the
Media Support to the hole
for the Clamp Knob.
G. Reinstall the Clamp Knob and washer through the slot in the Media Support.
Tighten the Clamp Knob to hold the Wire Frame Assembly in place.
3. Installing the Sliding Fence
Included in the Accessory Kit is a long and short Sliding Fence. The fences keep
the media together in a stack. Use the short Sliding Fence for postcards and me-
dia up to the size of DL envelopes. Use the Long Sliding Fence for all other sizes.
A. Locate the two long slotted
Fence Retainer tabs on the
Upper Floor. This is where
the Sliding Fence attaches
to the printer.
B. Slide the rectangular
shaped edge of the Sliding
Fence between the two tabs.
