AddressRight 300 Feeder Specifications
The AddressRight™ 300 feeder is designed to feed material from single sheets up to 3/8" in thickness.
Material size can vary from 2" long by 3" wide up to 15" long by 14" wide. It can feed into conveyor
transport systems, folding and stitching machines, and packaging and inkjet applications.
It feeds up to 40,000 pieces per hour, depending on size and material.
Assembling and Connecting the AddressRight 300
Feeder
Important:
Feeder installation and setup should only be performed by a qualified Pitney Bowes
Representative.
1. Unpack the feeder.
2. Install the two side guides using the four screws [A] supplied (two on each side).
3. Place the feeder on a flat level surface.
4. Plug the feeder into a properly grounded receptacle.
To permanently mount the feeder:
Pitney Bowes
User Guide October 2019
2
