Spin Fryer I12 Cooking Computer
Pitco P/N 60149505
L22-355 Rev 1
Page 22 of 28
5.11 Test
On/Off
With display showing
press product key
0
.
Display shows [TEST xx], where “xx” is ON or OFF. If ON is selected, temperatures
displayed by the controller are probe tip temperatures unaltered by values set in
section 4.1, or 5.1
. For normal operations, this setting should remain OFF
.
To change this value, use product key 0 to toggle choice (ON or OFF).
Press the
key. Display now shows
.
5.12 More Factory Menu Entry
With display showing
press product key
R
.
Display shows
.
R
5.12.1 Control ID Display
From the
display, press the [0] key.
Display will show [CONTROL ] [60149505], the Pitco part number, 60149505.
Press the [0] key again.
Display will show [S/W ] [0149501x], this is Pitco’s software number and current
revision letter.
Press the [0] key again.
Display will show [CHECKSUM] [00Fxxxxx], the software check sum of the loaded
software.
Press the [0] key again to repeat these items, or, press
to return to
.
5.12.2 Set
Network
Address
This menu is identical to Set Network Address section 4.8.9 except
is
displayed instead of [SERVICE].
5.13 To Exit Factory Menu (Level 4):
To exit Factory Programming, Press the
key. Display will show
.
Continue with settings in section 2 or 3, or exit in the next step.
To return to normal operations, press the
key again.
Display shows
;
, or
.
0
0
R
