ENGLISH
8
2. INSTALLING THE BOTTOM SHELF
Parts Required:
1 x Bottom Shelf
(#14)
4 x Screw
(#A)
4 x Locking Washer
(#C)
4 x Washer
(#B)
Installation:
• From underneath, secure the bottom shelf to all each leg using a
screw, locking washer, and washer. Ensure the flat surface of the shelf
is facing up.
• Once the shelf is secure, carefully lift the grill into an upright position.
3. SECURING THE LID STOPPER
Parts Required:
1 x Lid Stopper
(#3)
Installation:
• Secure the lid stopper onto the top of the main barrel using the pre-
installed screw on the top of the main barrel.
4. ASSEMBLING THE LID HANDLE
Parts Required:
1 x Lid Handle
(#10)
2 x Lid Handle Bezel
(#9)
Installation:
• Remove the pre-installed screws from the lid handle. From inside the
barrel lid, insert one screw to protrude to the outside. Add a bezel on the
screw, then hand-tighten the screw (from the inside) into the lid handle.
• Repeat same installation for other end of lid handle.
5. PLACING THE GREASE BUCKET
Parts Required:
1 x Grease Bucket
(#13)
Installation:
• Place the grease bucket on the spout hook on the end of the main
barrel. Ensure it is level to avoid grease spills.
3
4
2
5