ENGLISH
9
5. SECURING THE CHIMNEY
Parts Required:
1 x Chimney Gasket (#9)
1 x Chimney (#10)
2 x Screw (#A)
2 x Washer (#B)
2 x Locking Washer (#C)
Installation:
• Locate the chimney opening on the side of the main barrel. From the
outside, secure the chimney and chimney gasket to the side panel
using two screws, locking washers, and washers. The screw will fasten
to the pre-mounted nut on the inside of the barrel.
NOTE: Ensure the chimney cap allows for air to escape.
6. MOUNTING SIDE SHELF HANDLE, SERVING TRAY
Parts Required:
1 x Side Shelf Handle (#13)
1 x Serving Tray (#12)
2 x Serving Tray Handle (#11)
Installation:
• Remove the four pre-installed screws from the side of the main barrel.
Mount the side shelf handle onto the main barrel using four screws
previously removed.
• Mount serving tray handles to serving tray using the two pre-installed
screws on each handle. Place the serving tray onto the side shelf
handle. It will rest directly on the frame of the side shelf handle.
IMPORTANT: Avoid using the side shelf handle to move or lift the
grill. The weight of the unit will cause the side shelf handle to bend
or break, which is not covered by warranty.
7. INSTALLING THE BOTTLE OPENER
Parts Required:
1 x Bottle Opener (#7)
Installation:
• Remove the pre-installed screws for the bottle opener. Install the
bottle opener on the hopper.
5
10
9
B C A
6
13
12
11
11
7
7